RESULTS OR MONEY BACK GUARANTEE
2-YEAR WARRANTY
FREE SHIPPING ON ALL ORDERS

🚀 Transforms Your Any Pressure Washer: Upgrades to a powerful restoration tool with up to 5000 PSI.

✅ Multi-Surface Cleaning: Versatile for metal, concrete, brick, and wood projects.

🛠️ Easy Setup: Quick assembly with clear instructions for immediate use.

Upgrade your pressure washer into a powerful restoration tool with our NEW Sandblasting Kit! Our kit is made with top-of-the-line materials, including a brass nozzle and steel pick, a transparent steel wire hose, and maximum pressure of 5000 PSI.

Remove rust, paint, varnish, and corrosion from any surface effortlessly using the combined power of your pressure washer and your preferred sand medium.

INCREDIBLY VERSATILE:

Can be used on metal, concrete, brick, and wood.
Ideal for multiple projects around your home or business.
Saves you time and money.
Easy to Use:
Transparent steel wire hose shows sand and water flow.
Easy to control and adjust.
Stable performance and high reliability.
Ensures efficient and effective project completion.

BUILT TO LAST:

Made with wear-resistant and corrosion-resistant materials.
Designed to withstand tough projects for years.
No need for frequent replacements.

CAPABILITIES?

Remove paint, rust, varnish, and corrosion off trailers, cars, trucks, and frames
Restore Tractors, Jeeps, Farm equipment, autos, and auto parts
Motorbike parts and ornate metal castings ready for refinishing
Clean up old/used trailers, boats, concrete sidewalk
Blast paint and/or decal off from boats and vessels prior to undercoating and antifouling

HOW DOES IT WORK?

Suction-fed injection system: sand is fed into the water using the pressure of your pressure washer that sucks the sand meeting at the end of the attachment.
The working pressure (PSI) is 1000-5000 PSI. It uses baking soda, dry silica sand or washed and dried river sand, glass beads.

PRESSURE GUIDE FOR DIFFERENT TASKS

1. Removing Rust:

Recommended Pressure: 3000 - 5000 PSI (207 - 345 bar)
This level of pressure is ideal for tough, rust-covered surfaces like tractors, farm equipment, and vehicles. Pair it with silica sand or glass beads for the best results.

2. Stripping Paint:

Recommended Pressure: 2500 - 4000 PSI (172 - 276 bar)
Efficiently strip paint from cars, trailers, or boats. This range ensures the paint is removed without damaging the underlying material.

3. Cleaning Dirt, Grime, and Mold:

Recommended Pressure: 1500 - 2500 PSI (103 - 172 bar)
For general cleaning of dirt, grime, and mold on brick, concrete, or wood, this lower pressure range works effectively without causing damage to surfaces.

4. Varnish Removal:

Recommended Pressure: 2000 - 3500 PSI (138 - 241 bar)
Safely remove varnish from wooden surfaces and furniture, ensuring a smooth and clean finish.

HOW DO I SET IT UP?

1/4 slip connect adapter, 10’ hose, 16’’ pressure washer wand, 10’’ sand wand, the pressure washer wand, and sand wand are input while the nozzle is output.

WILL IT FIT ON MY PRESSTURE WASHER?

The Sandblasting Kit has a wide variety of connectors to choose from to fit your pressure washer:

CLICK HERE FOR CONNECTOR 👉 CONNECTOR

HOW LONG DO THE NOZZLES LAST?

This sandblaster Is durably built to last a VERY LONG TIME: so long as you change the nozzles as they wear out with use depending on PSI.

CLICK HERE FOR NOZZLES 👉 NOZZLES (60%OFF)

SET UP INSTRUCTION

Step 1: Prepare the Sandblasting Media

Select Your Media: Use play sand or glass media suitable for sandblasting.
Prepare the Sand: If using play sand, sift it through a sieve to remove larger particles that could cause blockages.

Step 2: Set Up the Equipment

Check Pressure Washer: Ensure your pressure washer has a PSI between 3000-5000 for optimal performance.
Attach Kit: Connect the sandblasting kit to your pressure washer wand.
Secure Suction: Use hose clamps to secure the suction part of the wand to prevent water from entering the hose.
Keep Media Dry: Cover the sand or media with a lid or place it in a container to keep it dry.

Step 3: Sandblasting Process

Position Yourself: Stand upwind to avoid water and sand blowing towards you.
Maintain Media Level: Keep the sand or media level higher than the washer wand to prevent water from feeding back into the container.
Blast Surface: Begin sandblasting by moving the wand back and forth evenly over the target surface. Continue until you achieve the desired result.

Step 4: Maintenance and Troubleshooting

Monitor Performance: Keep an eye on the pressure and flow of your pressure washer.
Clean Build-Up: Remove any material build-up at the connection points if you experience pressure loss.
Address Clogs: If clogging occurs, clear the blockage by unclogging or replacing the media or nozzle.

Step 5: Cleanup and Post-Treatment

Dispose of Media: Properly dispose of used media according to its type (play sand or other).
Clean Surface: Thoroughly wash the sandblasted surface to remove any residue.
Apply Rust Converter: Use an acid-based rust converter, like Ospho, to convert any remaining rust into a paintable surface. Let it sit overnight, then lightly reapply and let it soak.
Final Cleaning: Wash the surface with water and a scrub brush to remove residue. Clean with solvent to ensure it’s debris-free.
Prime for Painting: Apply an epoxy primer to seal the surface and prepare it for painting.

TYPES OF SAND AND ABRASIVE MEDIA:

Silica Sand:
Garnet Sand:
Aluminum Oxide:
Glass Beads:
Baking Soda:
Kiln-Dried Sand:

CONSIDERATIONS FOR USE:

Compatibility: Ensure the sand or abrasive media is compatible with your specific sandblasting kit and pressure washer.
Application: Choose the type of sand based on the material and the cleaning task at hand. For instance, use baking soda or glass beads for delicate surfaces, and garnet sand or aluminum oxide for more aggressive cleaning.
Safety: Always wear appropriate protective gear, such as respiratory protection, gloves, and eye protection, especially when using more aggressive media like silica sand or aluminum oxide.

SETUP AND OPERATION:

Prepare Equipment: Attach the sandblasting kit to your pressure washer using the appropriate adapter.
Load Media: Fill the sandblasting kit with your chosen abrasive media.
Test: Start on a small, inconspicuous area to ensure the chosen media and pressure settings are suitable.
Blast: Use smooth, even motions to clean the surface. Adjust the pressure and distance as needed.

By selecting the appropriate sand or abrasive media, you can optimize the performance of your sandblasting kit and achieve the desired cleaning results.

Homepage main

( LIMITED TIME PROMOTION 60%OFF ) UPGRADE SANDBLASTKIT